I don't remember if I posted about the "free" yarn I got on Craiglist, several years ago. My daughter called me and told me that I should check it out. The listing said, "we just moved in, there is something in the barn, we think it might be wool, if you want it you can have it." So I went and picked it up with my husband's truck. It was, indeed, sheep's wool. I took it home and unloaded it. Unrolled the sheets and looked at it. It looked like a lot of work. The fleeces needed to be unrolled, skirted, picked, washed, carded, and spun in order to get some yarn out of it.
I thought about how I would accomplish all that work for a few weeks. Then I drove to Michigan to the Zeilinger Woolen Mill and inquired if they would be able to process it. It turned out that I had just enough wool to meet their minimum quantity for processing, and they would be happy to perform all those services for me.
So, I had them make some sock yarn and some DK yarn, and leave some at the roving stage for me to spin. I don't remember the exact number of cones I received. It was either about 50 of each, or 100 of each. Probably 50.
The yarn feels a little rough on the cone, but once it is knitted and washed, it is delightfully soft and fluffy. I spoke with a fiber person in Michigan later, and she mentioned that she did not like the smell of the spinning oil that Zeilinger's uses. I hadn't noticed it previously, but now I do. It does wash out and is not noticeable in the finished garment.
I've moved these cones from Ohio to Michigan and back, and I recently decided it was time to use some of it. I have previously dyed some of the DK yarn for sweaters,although I haven't knitted the sweaters yet, and I have made four pairs of socks from the sock yarn. I love the socks, but I have way more sock yarn than I will be able to use up on socks. So I decided to knit a sweater with the sock yarn,
The yarn is a little bit heavier than commercial sock yarn. It does go through my circular sock machine well, but I wasn't sure how the flat-bed knitting machines would handle it. So I started swatching. I know that being plus-sized, it would be to my advantage to get the widest possible fabric for the number of needles, so I picked a built-in tuck stitch to swatch. I ended up choosing stitch pattern 229.
I swatched in stockinette, in tuck, then I used a variation that Mary Ann Oger had mentioned in the last seminar I attended with her. This is to turn on the double-high key and tuck in only one direction. The technique produces a flatter fabric with a less bulky tuck design. She says it looks less like a baby blanket that way.
My first swatch was on a KH-930 standard gauge at tension 8. I cast on a few stitches on either side of 21 and marked the tension with 8 eyelets. Then knitted a couple of rows of contrasting yarn (I used acrylic because I have a lot of it.) It was super hard pushing the carriage across the bed. The resulting swatch seems a little stiff. But I was surprised that the stitch tension swatch with only every other row tucked was almost as wide as the tuck sample!
I washed the swatch in warm soapy water and wet-blocked it. After it was dry, I removed it and I knew I would not like a sweater at this gauge.
Since that tension was so tight, I thought that perhaps the yarn would do better on a bulky machine. I tried the bulky KX-260 punchcard machine. I set the machine for tension 1. I cast on a 20x30 swatch with a few stitches on either side. The yarn fed easily through the machine, but the resulting fabric seemed a little bit lightweight. Just for comparison, I went ahead and continued to make another swatch at tension 2. I was worried about how I would achieve a ribbing at a tighter tension on this machine, since the stitch size tension was already at 1 and 2, and not possible to set any lower. I didn't think this fabric would work, so I didn't bother digging out a tuck punchcard. I went ahead and washed and blocked the swatches anyway.
Meanwhile, I decided to have another attempt on the KH-930 standard gauge machine. I still had tension 9 and 10 as a possibility. I did make stockinette, tuck, and half-tuck in each stitch size for this swatch. You might note that I carry my marker yarn up several rows. This helps me with keeping the stitches aligned while blocking. I'm not all that excited about the half-tuck pattern. I am thinking I may just make this sweater in stockinette. A simple, classic V-neck sweater.
Final swatch was on the mid-gauge KX-350. I decided to only do stockinette, since the KX-350 does not have built-in patterning. My KX-350 is in rough shape. The last time I used it on worsted-weight yarn I really had a hard time pushing the carriage across. I turned the carriage over and I saw a lot of gouges in the plastic guides. So I filed them down a little using sharp scissors and an emory board, lubed the machine, then proceeded to make my swatches. I used tensions 1 through 4. I hand-latched up the ribbing. After washing and blocking this swatch, I like the "hand" of tensions 1 and 2. I like tension 1 best.
The carriage pushed a lot easier than the KH-930.
Next, I measured the height and width of each of the swatches, between the marking threads.
I entered all these measurements in a spreadsheet. Listen to my comments by clicking the arrow in the display below.
I'm also hand-knitting a cowl with some yarn I acquired a few years ago at Heritage Spinning and Weaving in their clearance sale. The yarn is mostly silk. It's from "Delicious yarn" and the pattern is "Gourmet Cowl" The yarn is so soft, it is like a cloud. There are pictures of it on their Facebook page, and you can also find it on Ravelry or Etsy. You can google for "Delicious yarn gourmet cowl images" to see it. Unfortunately I can't post a photo directly unless I take my own photo, and my cowl is only a few inches tall at this point! It is definitely a project for a yarn snob as this yarn is just luscious!
It has been a frustrating pattern for me to knit, because I started knitting on a car trip. I missed an instruction to knit one stitch on the first few rounds, so my rounds were not coming out right. I think after about row 10 I finally got it right. The cowl is knit on circular needles, but after each row there is a wrap and turn, so it is actually knit back and forth, but in a circle. I loved the look of the cowl, and I love the yarn. I am just finding hand-knitting it too slow. I don't mind hand-knitting on a car trip, but I don't like it at home with all these machines available.
My brain is on fire with ideas about how I could knit this pattern on the machine. I attempted it on my bulky with two acrylic yarns. It isn't happening. It would require the intarsia carriage plus the ribber, and I don't think they are compatible. Then this morning, I got a brainstorm. What if I turned it 90 degrees? I could use the garter bar to flip the fabric every so many rows, and knit it on the diagonal. I abandoned my half-started sweater on the 930, and picked some fuzzy acrylic yarn in my stash to see if I can make it work. Instead of switching from knit to purl every 8 rows, I am doing it every 20 rows. I will write the pattern up once I get it completed. If it turns out! It will not be identical, it will be similar.
I just received two used machines (which is why we took the long car trip.) I will be checking them out to see if all the parts are there and what kind of condition they are in, then will use them either for lessons or for sale. I had been bidding on some auction machines and lost the bidding war, so when these two became available I jumped on the chance!
My dear husband is currently trying to repair my KH-970. The control box is not working. It would appear to work until I plugged the control box into the knitting machine. Then it would start a rapid ticking noise (my husband says it is "motorboating", for the technical term.) and the coffee cup would display. After a time, the menu would come up. I tried to load a pattern and knit, but the needles were not selected properly, and then the motorboating started again. On the Facebook 970 group, someone mentioned to replace the battery. Since the backlight for the LCD display has not worked for many Checking the parts catalog I found that the replacement battery was a Lithium CR-2032, a common 3-volt coin cell battery.
When I opened it and replaced the battery and the backlight, closed it back up, the symptoms did not improve. However, the backlight was working again. My husband has taken this as a challenge. We got out his digital multimeter and ran through the tests in the service manual that were possible to perform. Everything was supposedly working. He suspects it is a cold solder joint that needs to be re-soldered. He started doing this last night and blew the fuse on the board. We ordered a replacement fuse. A few minutes later he blew the fuse in the transformer. So until we find a replacement transformer (Power supply) we will not be experimenting any more. There is always the option of spending $600 to purchase a CB-2 from the Knit Knack shop. But as long as I have more than 5 working machines, I am questioning why I would want to do that.
No comments:
Post a Comment