Researching several methods of stretchy rib bind-offs.
1. Jenny's surprisingly stretchy bind off.
To execute this bind off, I think the best way is to transfer all the ribber needles to the main bed, then take the stitches off on a circular needle and knit the bind-off by hand.
2. Figure 8 stretchy bind-off (Diana Sullivan demonstrates on You-Tube)
This bind off also requires transferring all the stitches to the main bed first. Each stitch is basically manipulated twice. For a baby sock, this is not terribly large number of stitches.
3. Bind off in ribbing around the gate pegs (The Answer Lady demonstrates on You-Tube)
This is not quite as stretchy as the above methods, but halfway through the video she explains another way to accomplish this to gain even more stretch. This method does not require transferring all the stitches to the main bed first.
4. Manipulate the stitches to gain extra length by using the half-pitch feature. (Diana Sullivan demonstrates this method.)
This maintains the spirit of Eileen's original instruction.
5. Hand-sewn bind off. Susan Guagliumi's blog post about how to accomplish a beautiful stretchy bind-off includes a video demonstration.
I could make several samples and compare results. That will take a while!
Saturday, January 6, 2018
Child sock fail

I used Eileen Montgomery's pattern to knit these socks in a child size small, at the request of a neighbor. The socks are too large, but the opening at the top is too tight. I used tension 6 for the main tension, and the instructions said to go up 6 tensions for the loop-through-the-loop bind off. Unfortunately, I could only go up 4 numbers since the highest tension is 10. And, they are too tight.
I will also deduct 5 rows of knitting from the body of the foot for the length, (it specified 36).
Since these socks are made from the back of the heel, down the bottom of the sock, then the toe is knitted, then the top of the sock, and finally the ribbing, there is not an easy way to remove 5 rows. That would be easy if the socks were knitted from the toe up or top down. The seams were sewn with the yarn end at the end of the ribbing, so the seams will need to be un-sewn first, then the loop-through-the loop cast off undone, the ribbing unknitted, the toe unknitted, then remove 5 rows of the bottom, re-knit the toe, re-knit the instep, and finally re-knit the ribbing.
These socks were made from leftovers from other projects. Maybe I will just keep these as a learning experience and start from scratch with new yarn.
Tuesday, January 2, 2018
Happy New Year!
To all of my followers, friends and family I wish a cozy New Year filled with warmth and good cheer. I'm trying to incorporate more "hygge" (Danish word meaning natural, cozy and filled with knitted items and candles) or "Gemütlichkeit" (German word meaning almost the same thing,) Wikipedia defines it as coziness, peace of mind, and a sense of belonging and well-being springing from social acceptance.
My township has announced a "Sit and Stitch" group on the first Tuesday of every month. I went today, only to find that township offices are still closed for the holidays. I guess they will start next month!
I am working on pattern "Left Wheel" in a handknitted version. It is a chunky yarn. I'm using Plymouth Colorspun Chunky, which has been discontinued in my colors. I was able to find a few more skeins in a coordinating colorway. It is my intention to knit a similar sweater again on the machine after I finish the handknit version. At this rate I am doing more hand-knitting than machine knitting!
My township has announced a "Sit and Stitch" group on the first Tuesday of every month. I went today, only to find that township offices are still closed for the holidays. I guess they will start next month!
I am working on pattern "Left Wheel" in a handknitted version. It is a chunky yarn. I'm using Plymouth Colorspun Chunky, which has been discontinued in my colors. I was able to find a few more skeins in a coordinating colorway. It is my intention to knit a similar sweater again on the machine after I finish the handknit version. At this rate I am doing more hand-knitting than machine knitting!
Saturday, December 9, 2017
Solving the abrasion problem.
I frogged (unknitted) the project. I now have five balls of yarn. Still thinking on what to do to fix this.
Monday, November 6, 2017
Abrasion
I was making some progress on the surprise sweater, but I am currently stalled.
I finally realized that for every four pairs of rows knitted, I needed to put one stitch in hold every three rows at this gauge in order to make a perfect (well, almost perfect) 45-degree angle. I was working away and feeling really proud of myself at how well the miter was shaping up (pun intended) when I noticed two problems.
Can you see it here? The first problem is that the reason you can see the diagonal line of my miter so well is that there are HOLES in my knitting. These might be caused because I was not paying any attention to wrapping when I was short-rowing. These stitches are also showing abrasion from the carriage passing over them.
The second problem which might be a little more difficult to see in this photo, is even on the area of the garment that is in hold position, there is abrasion and pilling at the current row. I believe this is caused by the brushes rubbing the same stitches on every pass of the carriage. I am making sure to take the carriage past the row counter to keep track of my knitting, and each time, the stitches are irritated. You can see a "hazy" line under the needles, like a little cloud of fuzz.
Well, this garment will not be worn on church on Sundays, the way it is currently going. I have a couple of choices.
1. Rip back the entire miter, and the last two or three rows prior to beginning the miter, break the yarn, and throw away (or use for future waste yarn) and find my place in tuck stitch, then resume knitting with my new knowledge, hoping there is enough yarn to finish the sweater.
2. Continue with this garment from where I currently am, and treat it as a fitting garment, what we call a muslin in the sewing world. Did I mention that this yarn was free along with the purchase of a slightly (hahaha) used knitting machine? Make the final garment in a better yarn (hoping to get same gauge), and this time, prevent the holes and the abrasion from occurring. After fitting the garment and making any needed adjustments, cut this up and make doll blankets out of it by serging the edges and putting a ribbon trim.
3. Continue with this garment from where I currently am, and come up with a creative way to embellish it to cover up the problems. Embroidery? Applied I-cord?
Since I managed to drop 75 percent of the stitches when I put the needles back in work to start the next section, I just covered the machine up and left it, until the next time we visit the farm. This project is taking a time-out while I decide which approach I will take.
In the meantime, I am thinking about how I will avoid this abrasion the next miter or the next time I knit this sweater. I think the best approach will be to take the "held" stitches off on waste yarn while knitting the miter. This includes the stitches in the miter as well as the left side of the garment in hold at the beginning. Then there will be no possibility of the carriage abrading the stitches. It will mean some extra time to rehang them before starting the next section, but I can just consider it part of my meditative practice.
Labels:
abrasion,
hold,
miter,
short row,
surprise jacket,
tuck,
waste yarn
Friday, October 27, 2017
Detroit Skyline in October Inspiration
My friend Leya Coleman participated in a bike ride over the Ambassador bridge last Sunday, and took a gorgeous picture of the Detroit skyline WHILE RIDING which she posted on Instagram. With her permission, I am using it for inspiration for my next project.
When I saw her photo, I had already pulled together a few skeins of yarn, starting with one I created during Spinzilla. This skein was randomly spun from four ounces of different fibers that I had received from Spinning Box in September 2017. Unfortunately I did not keep track of which fiber came from which business, since I was concentrating on Spinzilla! Below on left, is the two miles of fiber I spun during Spinzilla. The yarn I had chosen as a core of the next project is the sixth from left on top row, with shades of green, yellow, blue, black and white. The second photo shows it as a closer view (on the right).
You can see from this photo that the yarns are of various weights, especially the copper-colored one. I decided to ply this very fine yarn, so wound off two balls and using my spinning wheel, made it into a 3-ply, which took a couple of hours. The original yarn was a Z-twist, so I plied in an S-direction. These letters refer to the direction of the twist, which you can see by examining the yarn closely, and the diagonal bar in the letter. By turning the spinning wheel in a clockwise direction, you achieve Z-twist, by turning it counter-clockwise, you achieve an S-twist. It is still quite a bit finer than the others, and is still in the lace-weight category, so I am considering winding off into a center-pull ball and plying it one more time with a Z-twist from both ends of the ball.
I complemented the yarn with others from my stash. One was a special skein from Grace Gerber, who was the creative genius behind Larkspur Funny Farm. It's shown in the upper left corner below. I've had them piled in a a basket in my dining room, walking past them for inspiration. I knew there was not enough for a complete sweater, but I was looking at the color harmonies. I decided to add a blue alpaca that has been lingering in my stash for 20 years or more. That is the cone at lower left.
Then I saw Leya's photo and was impressed by how many of the same colors were reflected in her photo!
I quickly added a few more stash yarns. I found an online utility, palettefx.com, that will pull the palette colors out of your photo, and using it and a few other graphics tools, I soon had a side-by-side comparison of the palette in her photo and my selected yarns.
Well, I realized that the background of my photo was grey, which accounts for the greys in the middle of the top palette. As you can see, many of the other colors are very similar! I just needed the ochre and browns from Leya's palette to act as a complementary! (According to the palettefx site, these colors are "Rusty Nail" and Millbrooke.) One neat feature of this site is that for many colors, there are suggested suppliers for the colors in the palette. Here is an example for Millbrooke.
Unfortunately, for that particular color the link does not work, maybe the yarn was discontinued? Clicking on the lavender bar at the left yielded this ad for JoAnn Fabric store with a specific suggested yarn. Kind of a nice feature, if it works.
I am not sure of what algorithm they might use to match the colors, since the lavender bar in the palette did not have a name, only a hex number, and to my eye, none of the featured yarn colors are a match for the lavender, although perhaps the pile of yarn at the left includes this shade.
Good thing I will not need to shop for any more yarn! At any rate, since a couple of the colors in Leya's photo were not included in my selected yarns, I found another couple of yarns in my existing stash that I hope are close to matching, or at least pleasing.
New Machine Knitters group launched!
Last Saturday the Mitten Thumb Machine Knitters met for the very first time at the JoAnn store in Rochester Hills.
Great meeting, I have a feeling we will become good friends. Several people brought items for "show and tell" and I demonstrated the thread lace stitch on a Brother electronic machine, and the plastic-bed Brother KH-341 with integrated Knit Leader.
Among the group are several with various types of machines and varying levels of experience. For the next several meetings we have decided to meet in each other's homes to help each other get set up and started on knitting. Next meeting will be January 20, 2018. Contact me for further details, or join the Ravelry group.
Subscribe to:
Posts (Atom)







