. brightmeadowknits

Sunday, January 14, 2018

Completed baby socks, and fitting a plus-size woman's sweater.

Sewn and blocked, and gave to a mutual friend who works near me and lives near the baby's mom.  Can't wait to hear if she likes them!



Meanwhile, I have only two rows and a bind-off to complete on my hand-knitted  "Left-wheel" sweater Pattern.  See the link for a photo of the original design by Berroco Design Team.  I've been working on it as much as possible since the day after Christmas. 

I couldn't wait to try it on, so here us a sneak peek.  Notice the circular needle still in the right front band!  Photo credit: my wonderful husband.


My intention is to make this same sweater (with a few minor fitting changes) in the same yarn, with a different colorway.  Notice how slim the model in the photo is, she is not built like me at all!  The design sizes up, but doesn't really accommodate my roundness.

 This sweater took 8 balls of Plymouth Encore Chunky Colorspun, which does not seem to be widely available any more.  I've purchased a few more balls on eBay to make sure I have enough to complete the project.  The back took exactly two balls,  each side front took exactly one ball, the sleeves each took just barely over a ball.  Really, less than a yard of the new ball was needed to complete the sleeves, and less than a yard was left on each of the front sides. The bands took another two complete balls. I am holding what is left of the skein, and I still have two rows to knit and to complete the bind-off.

For this version, I added a few rows of short-row shaping to the center of the  upper back to accommodate my round back. I knitted two-thirds of the way across the row, wrapped the next stitch, then knitted back, wrapping and reversing again when I reached the first third, then knitting across the rest of the row.  I did this maneuver twice, then a shorter one closer to the neck edge. This will also keep my neck from getting cold.  On the right front I added a short-row "godet" from the bottom to the point of the bust, to give me a little more room in the hip.  Otherwise I knit as directed for the largest size in the pattern.  Using the specified needle size, this yarn knitted up to the exact stitch and row gauge called for in the pattern.

For my revised machine-knit version, I want to make the entire garment just a few stitches larger around, especially the sleeves.  Instead of color-blocking the entire piece, I will mix up the various colors within the pieces.  I will add an inch to the length.  I also plan to keep the short-row revisions already included, and I will add some short rows on the upper left front to avoid the visual distraction of the stripes running uphill over my chest, and allow for a better fit.  Instead of knitting the bands separately, I am currently deciding on beginning with a hem.  Maybe by the time I finish, I won't really be knitting "Left Wheel" any more!  I haven't knitted the gauge swatch yet on the machine, so it will be interesting to see if I can hit the gauge exactly on the machine.

Monday, January 8, 2018

Baby socks!

In my last post I was trying to decide the best/easiest approach to making the stretchy bind-off for a pair of baby socks.  

I decided to use Diana Sullivan's half-pitch method.   I am happy with the result!

Since the baby is a toddler, the small child-size socks in Eileen Montgomery's basic sock pattern were a little too long.


  For this version, I cast on 23 (versus the original 25) stitches in waste yarn.  The waste yarn is bright green in the photos below.  Then I knitted one row of ravel cord, lime green in the photo.  Then I knitted one row, before proceeding to the short-rowed heel, the sole of the foot, and continuing with the toe. 

I modified Eileen's method a little, by hanging a loop on one side every other row, using the sew-as-you go technique, as I knitted the 25 rows for the instep.  This means that I will have one less seam to sew up at the end. Once the instep was complete, I hung the open stitches from the beginning on the adjoining 23 needles, reversing the side from the first sock, so that the seams on both socks will both be on the opposite side of the leg.   I added a couple of plain rows on this sock (purple) before beginning the ribbing,  to force the stripes of the ribbing to begin on the same color as the first sock.


I knitted 36 rows of ribbing on the first sock, but on the second I was more concerned with making sure the last couple of rows were dark blue, so that the socks would match.  I stopped at 35 rows on the second sock. No one is going to count the rows of knitting, but the visual impact of a different edge color would be very noticeable.   I used the half pitch method to knit the last row.  I thought my machine would jam as it knitted very hard with all the extra yarn winding around the extra needles on that row.  Probably that means my ribber needs an adjustment, as I noticed Diana's  machine in her video did not make the awful noise that mine did.  


I bound off using the loop through the loop method that Diana suggested.  As you can see in the photo below, the completed bind-off stretches to nearly double the normal width.


As it is late here, I have decided to sew the seams tomorrow morning when I am fresh.

The sock on the left has the ravel cord and waste yarn removed, and a few loose ends to weave in.  Since there is only one row of ravel cord, it can easily be pulled out, completely separating the waste yarn from the body of the knitting.  I started sewing the seam on this sock.  Due to the random nature of the yarn striping, the stripes do not match exactly.  If I were to force the stripes to meet, the seam would be lumpy.  The sock on the right still has waste yarn and ravel cord in place, and the seam is completely open. 


I am loving the happy colors of this yarn.  I bought it at a LYS (local yarn store) for half off.  It was a lonesome 50 gram ball, the last one in this colorway.  An adult sock normally takes an entire 50 gram ball for one sock, but I was able to get three toddler socks from one ball.  Had I not had to re-knit a couple of times to downsize the sock and fix a mistake in the sew-as-you-go seam, possibly I could have gotten four, but perhaps not, due to color matching. 


Saturday, January 6, 2018

Stretchy rib bind-off

Researching several methods of stretchy rib bind-offs.

1.  Jenny's surprisingly stretchy bind off. 

To execute this bind off, I think the best way is to transfer all the ribber needles to the main bed, then take the stitches off on a circular needle and knit the bind-off by hand.

2. Figure 8 stretchy bind-off  (Diana Sullivan demonstrates on You-Tube)

This bind off also requires transferring all the stitches to the main bed first.  Each stitch is basically manipulated twice.  For a baby sock, this is not terribly large number of stitches. 

3. Bind off in ribbing around the gate pegs (The Answer Lady demonstrates on You-Tube)

This is not quite as stretchy as the above methods, but halfway through the video she explains another way to accomplish this to gain even more stretch.  This method does not require transferring all the stitches to the main bed first.

4. Manipulate the stitches to gain extra length by using the half-pitch feature.  (Diana Sullivan demonstrates this method.) 

This maintains the spirit of Eileen's original instruction.

5. Hand-sewn bind off.  Susan Guagliumi's blog post about how to accomplish a beautiful stretchy bind-off includes a video demonstration. 


I could make several samples and compare results.   That will take a while! 

Child sock fail


I used Eileen Montgomery's pattern to knit these socks in a child size small,  at the request of a neighbor.  The socks are too large, but the opening at the top is too tight.  I used tension 6 for the main tension, and the instructions said to go up 6 tensions for the loop-through-the-loop bind off.  Unfortunately, I could only go up 4 numbers since the highest tension is 10.  And, they are too tight.

I will also deduct 5 rows of knitting from the body of the foot for the length, (it specified 36).

Since these socks are made from the back of the heel, down the bottom of the sock, then the toe is knitted, then the top of the sock, and finally the ribbing, there is not an easy way to remove 5 rows.  That would be easy if the socks were knitted from the toe up or top down.   The seams were sewn with the yarn end at the end of the ribbing, so the seams will need to be un-sewn first, then the loop-through-the loop cast off undone, the ribbing unknitted, the toe unknitted, then remove 5 rows of the bottom, re-knit the toe, re-knit the instep, and finally re-knit the ribbing.

These socks were made from leftovers from other projects.  Maybe I will just keep these as a learning experience and start from scratch with new yarn.

Tuesday, January 2, 2018

Happy New Year!

To all of my followers, friends and family I wish a cozy New Year filled with warmth and good cheer.  I'm trying to incorporate more "hygge" (Danish word meaning natural, cozy and filled with knitted items and candles) or "Gemütlichkeit" (German word meaning almost the same thing,) Wikipedia defines it as coziness, peace of mind, and a sense of belonging and well-being springing from social acceptance.

My township has announced a "Sit and Stitch" group on the first Tuesday of every month.  I went today, only to find that township offices are still closed for the holidays.  I guess they will start next month! 

I am working on pattern "Left Wheel" in a handknitted version.  It is a chunky yarn.  I'm using Plymouth Colorspun Chunky, which has been discontinued in my colors.  I was able to find a few more skeins in a coordinating colorway.  It is my intention to knit a similar sweater again on the machine after I finish the handknit version.  At this rate I am doing more hand-knitting than machine knitting! 

Saturday, December 9, 2017

Solving the abrasion problem.

I frogged (unknitted) the project.  I now have five balls of yarn.  Still thinking on what to do to fix this. 

Monday, November 6, 2017

Abrasion


I was making some progress on the surprise sweater, but I am currently stalled.

I finally realized that for every four pairs of rows knitted, I needed to put one stitch in hold every three rows at this gauge in order to make a perfect (well, almost perfect) 45-degree angle.  I was working away and feeling really proud of myself at how well the miter was shaping up (pun intended) when I noticed two problems. 


Can you see it here?  The first problem is that the reason you can see the diagonal line of my miter so well is that there are HOLES in my knitting.  These might be caused because I was not paying any attention to wrapping when I was short-rowing.   These stitches are also showing abrasion from the carriage passing over them.

The second problem which might be a little more difficult to see in this photo, is even on the area of the garment that is in hold position, there is abrasion and pilling at the current row.  I believe this is caused by the brushes rubbing the same stitches on every pass of the carriage.  I am making sure to take the carriage past the row counter to keep track of my knitting, and each time, the stitches are irritated.  You can see a "hazy" line under the needles, like a little cloud of fuzz.



Well, this garment will not be worn on church on Sundays, the way it is currently going.  I have a couple of choices.

1. Rip back the entire miter, and the last two or three rows prior to beginning the miter, break the yarn, and throw away (or use for future waste yarn) and find my place in tuck stitch, then resume knitting with my new knowledge, hoping there is enough yarn to finish the sweater.

2. Continue with this garment from where I currently am, and treat it as a fitting garment, what we call a muslin in the sewing world.  Did I mention that this yarn was free along with the purchase of a slightly (hahaha) used knitting machine?   Make the final garment in a better yarn (hoping to get same gauge), and this time, prevent the holes and the abrasion from occurring.  After fitting the garment and making any needed adjustments, cut this up and make doll blankets out of it by serging the edges and putting a ribbon trim.

3. Continue with this garment from where I currently am, and come up with a creative way to embellish it to cover up the problems.  Embroidery?  Applied I-cord? 

Since I managed to drop 75 percent of the stitches when I put the needles back in work to start the next section,  I just covered the machine up and left it, until the next time we visit the farm.  This project is taking a time-out while I decide which approach I will take. 

In the meantime, I am thinking about how I will avoid this abrasion the next miter or the next time I knit this sweater.   I think the best approach will be to take the "held" stitches off on waste yarn while knitting the miter.  This includes the stitches in the miter as well as the left side of the garment in hold at the beginning.    Then there will be no possibility of the carriage abrading the stitches. It will mean some extra time to rehang them before starting the next section, but I can just consider it part of my meditative practice.







© Bright Meadow Knits Blog · Privacy Policy · Terms of Use
© Bright Meadow Bicycle Blog · Privacy Policy · Terms of Use