. brightmeadowknits

Friday, April 7, 2023

Franz and Pope Knitting Machines

Some other tidbits on the Franz and Pope History from around the web: 

Advertisement shared on Huntington Library web site: 



News article from 1877 announcing that Franz and Pope was going into partnership with Creelman in Canada.  Creelman later came out with their own line of knitting machines.  Courtesy Angora Valley.



The York (PA) Daily Record published an article in which they linked the founder of the Lee Jeans company to Franz and Pope Knitting Machines.  



The article includes the original patent drawing for the knitting machine from 1869. 



The article lists the US patent numbers.  


"Franz and Pope continued to make patentable improvements to this knitting machine; being issued additional United States Patents 99425, 99426, 102529 and 105187 at various times during 1870. " 




In 1879, in the United States Circuit Court for the Eastern District of Pennsylvania, a judge ruled that their patents had been infringed upon by Dana Bickford of Bickford Family Knitting machines. You can read about it here on the Case Law Access project.  The impact on the community of Brattleboro, Vermont in New England is described in this news article.  



In 1881, it was ruled in  that their patents had been infringed upon by the Lamb Knitting Company.  This link to LawResource.org gives the full text.  

I found this photo of a Franz and Pope with gold paint.  It's not the same exact model as mine. Photo courtesy of Victiques. 

and here's another, courtesy of "Images of Old Hawaii".  Do you think that Ida Mae Pope took it with her to teach in the Queen's home?  This one is similar to mine. 

 

OldTymeStockings gives a photo of a later machine with the raised lettering indicating it is a Franz and Pope. This is model #2.  Does that mean mine must be a #1, since the company hadn't learned to put identifying marks on it yet? 




From the same web site, here's a photo of model #4.  Why don't things get decorated with gold leaf anymore? 





From Worthpoint, an image from an auction listing of a machine with all the doodads.  I can't share the photo here, but if you click the link you can see it. 

Evidently William Franz moved to Forth Worth, Indiana later in life.  His obituary is shared on the Fort Wayne Daily Gazette.  






Franz and Pope Restoration Part 2


 Earlier I posted Part 1 of my restoration efforts.  I had to laugh at the booklet advertising the machine.  A complete sock in seven minutes!  




 I had to take a break for lunch.  I made soup from leftovers in the refrigerator.  Turkey, turkey broth, carrots, broccoli, cauliflower, tomatoes, onion, celery, mushrooms, roasted butternut squash, and spinach. A little seasoned salt and a little turmeric. It was really good, so good I had two bowls. 



Well, I was having trouble with the trailing cam latch, it is sticky.  


 



I saturated the area with the Marvel Mystery oil, worked it back and forth a few times, but it remains sticky.  I used an emery board to soften the rough edges a little, but probably not enough to matter. 

I also cleaned up the cylinder.  As you can see in the photo, it has some pitting.  I gave it a liberal dousing with Marvel Mystery Oil and then took an emery board down through each of the slots several times.  Some of them seemed a little tight.  




 I put it all back together and tried knitting.


It does go forward now, but it needs to be encouraged.  Bang, Bang, Bang.  In fear of damaging needles before I confirm with Pat at Angora Valley that she has needles for this machine, I only put a few needles in.  She's sending me a sample.  Her web site says that one of the needles will fit a Franz and Pope, if the gauge is the same.  I'm not sure how to measure gauge, but I sent her a photo of one of the needles with a ruler next to it.  

So I put these few needles in, added a yarn tension spring borrowed from a flatbed machine, grabbed a net produce bag from my kitchen counter, used the hammer inside the bag for weight, and tried knitting.  As I said, bang, bang, bang.  These parts are casts iron but that can't be good for them.  

So I disassembled everything again and am soaking the cyclinder shell in the Marvel Mystery Oil overnight.  I can't tell if the stitcky latch is because of a lubrication problem, or if the latch is damaged.
My plan is to put it back together after a really good long soak, then get my actual cast-on bonnet, a buckle and a weight from my other CSM, and see if it works any better.  



 









































Franz and Pope Restoration Part 1

 I was very happy to find that one of the members of my fiberarts guild had a Franz and Pope Circular Sock Knitting Machine (CSM or CSKM) for sale.  

I have been looking for one for several years.  Franz was a jeweler, and Pope was a doctor.  They were both named William.  They lived in Crestline, Ohio, which is not far from here, just across the county line in Crawford County.   Franz and Pope patented their sock machine in 1874.  They manufactured the machines in Bucyrus, Ohio, the county seat,  and later in Canada.  The first chapter of Sandra Bonura's Book A Light in the Queen's Garden deals with the childhood of Pope's daughter, Ida and describes the CSM.  I have been trying to find the patent documents for a while, and the only one that Google Patent Search shows me is a Canadian patent. I did, however find an advertising document on a link to Library of Congress, Harvard University and other libraries that I found on the US Office of Patents and Trademarks website.  They have a new web-based patent search application named Patent Public Search tool.


 

The advertisement bulletin includes an illustration of the machine which matches the CSM my friend had.  So I offered him a range appropriate for a vintage working sock machine with all the parts. 



When I arrived to inspect it, I was disappointed that he did not have all the accessories.  He told me it only cranked backwards.  It was true, the way he had it set up, it only cranked backwards.  I tried to show him how to raise the needles so it would crank forward. But, when I did that, the needles slid right back down.  I couldn't immediately see how to remove the needles, because the retaining ring was made of steel, not a spring as in newer machines made in the 1920's or later.   I wasn't able to make it crank forward.  Because of that, and because I wasn't really sure if it was a Franz and Pope, having no raised or engraved lettering or rivets even for a metal plate, I withdrew my initial offer.  But after 
  • a Facebook post from Pete Oswald saying that the needles would stay up with weight
  • downloading and reading the manual 
  • finding the advertisement with the illustration above
  • thinking for a few days, 

I called and made a final offer, which he accepted.  

I picked it up yesterday.  I couldn't wait to take it apart and see what was keeping it from cranking forward.  

I took all the needles out and I am soaking them in  Marvel Mystery Oil.  I put one back in.  

So, I started taking it apart. 


These two screws on the bottom seemed like an obvious place to start.


And, I'm gonna have to take off the stitch size adjustment knob. 


I won't be able to remove the retaining ring for the cylinder unless I get the stitch size adjustment dial out of the way.  Out come those two screws.



Now I can remove this screw and the one on the opposite side, to remove the retaining ring. 

Even after all the screws were removed, the cylinder was so tight I had to get out a hammer and give it a few light taps before it started moving.  Once it started, it came out in a hurry.

The inside was not what I expected.  The fixed cams are different from my Home Profit. If I had read the manual closer, I should have been forewarned.  


So, one of the cylinder latches seems a bit sticky (the one labelled C in the drawing, and the cam lugs D and E had some burrs and rough edges. 



 

Friday, March 31, 2023

Yarn Counts and Weights for machine knitters.

The Craft Yarn Council  (CYC) has done a fantastic job of standardizing yarn weights sold in the US into a simple, easy-to-understand numbering system.  Most of the yarn currently sold in the US will refer to this numbering system on the label of the skeins. 

Handknitters have enthusiastically adopted this system.  So now, when discussing yarn weights with those who have learned the numbers and how they relate to yarn dimensions, they frequently say things like "is it a 3?".  This is a little disconcerting to older knitters like myself who grew up referring to yarn weights with terms like "fingering", "sport weight", "DK", or "worsted weight".   

From the chart on the CYC website, I have extracted the top two rows.  



But machine knitting yarns are sold on cones, and they are often referred to by a different set of numbers. Numbers like 2/24 or 8/30.   This is even more confusing to new machine knitters.  

The best, simplest and most comprehensive reference I have found to explain these numbers is found on the website of a UK yarn company called Airedale Yarns.  There is an older reference that was written in the 1920's, it is more comprehensive but also full of technical explanations, charts, tables and algebraic formulas, which makes for a heavy read. 

The Airedale web page explains that wool and acrylic yarns are usually sold using the Worsted Count system.   The Worsted Count system is based on the number of 560yd (yard) units in a lb (pound) of yarn.  So, the number 2/24 means that there are two ends (plies) of yarn, each of which was spun to the thickness required to get 24 x 560-yard from a pound of yarn.  Note: it's pretty thin.  Like a 0 in the US system.  

Cotton yarn is measured differently.   The count is based on the number of 840yd (yard) units in a lb (pound) of yarn.  The size is expressed differently, also.  20/3 cotton yarn means the yarn is spun to a thickness so that 20  units of  840 length from a pound. Then 3 ends, or plies, are spun together to make the 20/3 yarn.   

Notice that the relative position of the thickness of the yarn and the number of ends are flipped between the Worsted Count system and the Cotton Count system.  

 
This screenshot from the Hobbii website shows that they give buyers both the cotton count and the Traditional name.   The Craft Yarn Council would call an 8/4 cotton yarn a "1" size yarn. 


Interestingly enough, both of the above counting systems are based on UK Imperial measurements.  It shows the historical importance of the British Empire to the textile trade. 

The Airedale web site also gives as an example the New Metric count system.  It is similar to the Worsted system, but instead of number of yards in a pound, it is measured based on meters in a kilogram.  I have some cones of yarn in my stash that use this system.  These cones are labeled with NM after the numbers. 

Just to make it even more confusing, many hand and machine knitting yarns that are sold in the UK are described as 3-ply, 4-ply, and so on.   So if the pattern was published in the UK, it may call for 3-ply yarn.  This does not necessarily mean 3 ends or strands of yarn are plied together, but instead is based on yarn weight that was traditionally spun in Scotland to a certain thickness.  The Airedale Yarns site explains:

 "On Scottish Islands throughout the 17th and 18th centuries whole familes would knit sweaters, socks, accessories and stockings both to sell and use. It is believed that the first yarns to have a consistency of thickness that was measured and noted was from these islands. It was a yarn with 4 fine ends of wool twisted together and was the standard weight for knitting much of their knitwear. This thickness created a lightweight, flexible fabric that wasn't too heavy and was perfect for socks and executing complex designs such as Fairisle. This thickness is what is now known as 4ply, even though the knitters in Scotland probably wouldn't have called it that. 

When two ends of this "4ply" yarn were twisted together they would have been used for thicker, warmer garments. Again the knitters might not have referred to this yarn as Double Knitting, but it is what we now call it. So 4ply was essentially the benchmark for knitting yarn thicknesses in the UK, double it up to create DK, double it up again to create Chunky, double it up again to create Super Chunky, and of course if you halve it you create 2ply. The very thinnest and very thickest of these terms are open to interpretation as not all 2plys and super chunky are quite the same as each other, but it's a guide."


In the back of every issue of the magazine Machine Knitting Monthly, which is published in the UK,  is a table under the heading "Industrial Counts" that converts the Worsted Count yarns into the ply system. 

Using this table as a reference, I have created my own table. 



To make things even more complex, yarns with a lot of loft, like mohair, alpaca, angora, and some other synthetic yarns, have a "halo".  The yarn appears to be much thinner than its Craft Yarn Council number would suggest, because when knitted loosely, the loftiness fills in space between the stitches.  

For an example, I have several cones of Forsell Naturell.  It is a blend of wool and alpaca.  Boldly on the label it proclaims "Knit as 3 ply", although the yarn appears to me to be a lace weight. 


So, what yarn weights can be used on knitting machines?  The Airedale yarns web site also includes a section to discuss this, along with weaving setts and WPI. 

5.6 Gauge - Standard Gauge (4.5mm)

Beginning with 1ply and a maximum of 4ply. You can use really fine yarns like 2/30’s for lace shawls and the like and for draping fabrics.

2.8 Gauge - Chunky (9mm)

This gauge of machine can take Double Knitting and upwards. Aran or Chunky weight would be the maximum if you are knitting every needle, slightly thicker if you use every other needle. You can use really thick yarns to work knitweave as well which is where you knit with a thinner yarn and “weave” the thicker yarn through the knitted stitch.



My opinion is that the standard gauge machines are really pushing to use a DK weight yarn.  You have to use the largest stitch sizes, like MT 9 or 10.  You may want to do this to take advantage of having 200 needles on the bed, but you are giving up the ability to set the tension three or four tensions higher for binding off or other hand manipulations like crossing cables.   The mid-gauge machines, like the LK-150 or the Brother KX-350, are better suited for handling DK and sport-weight yarns. 










Friday, March 24, 2023

CSM Adventure

 I have been looking for a Franz and Pope Circular Sock Knitting Machine for a while.  My ancestors came to the German immigrant community near Crestline, Ohio, and Franz and Pope filed their patent from there.  Eventually the Franz and Pope manufacturing was located in Bucyrus, Ohio, the county seat of Crawford County, and some of my ancestors also lived there. 

I recently was informed that a member of my local fiber arts guild may have one of these for sale. 

I drove to his home to see it.  

I was a little disappointed.  

I was expecting this:


instead, what was on offer was less than this.   




I backed out of my original offer, and I am feeling awful. The seller is a former member of my fiber arts guild.  


I am completely captivated by the possibility of possessing a piece of history, but on the other hand, the machine on offer does not have any identifying marks and does not show that it was manufactured in the city of my ancestors.  

I am torn.  Should I contact him again and ask for a lower price than my original offer?   







Friday, March 10, 2023

AI and me

 I decided to try out this new Chat GPT service everyone is talking about.    Here's what it wrote for me, when I asked it to write a blog post. (Photos areine, from our last crank-in in Marion Ohio) 




Machine Knitting on Antique Circular Sock Machines: A Beginner's Guide


If you're a knitter, you're probably familiar with hand knitting. But have you ever tried machine knitting? Machine knitting allows you to create intricate patterns and designs with ease, and antique circular sock machines can make this even more enjoyable.


Antique circular sock machines, also known as CS machines, were first introduced in the late 19th century. They were originally used to create socks for soldiers during World War I and II, and then became popular among families and individuals who wanted to create their own socks and stockings. Today, many knitters still use antique circular sock machines to create socks, hats, scarves, and other items.


If you're interested in machine knitting on an antique circular sock machine, here's a beginner's guide to get you started.


Choosing the Right Machine

There are many different models of antique circular sock machines available, each with its own features and quirks. Some popular models include the Legare 400, the Auto Knitter, and the Gearhart. Before purchasing a machine, do your research to find the model that best suits your needs and budget.


Setting Up the Machine

Once you have your machine, it's time to set it up. This involves assembling the machine, threading the yarn through the machine, and adjusting the tension. It's important to follow the manufacturer's instructions carefully to ensure that the machine is set up correctly.


Casting On

To start knitting, you'll need to cast on stitches. This involves setting up the first row of stitches on the machine. There are several different methods for casting on, but the most common is the e-wrap cast on. This involves wrapping the yarn around the needles in a specific way to create the first row of stitches.


Knitting

Once you've cast on your stitches, it's time to start knitting. This involves turning the crank on the machine to move the needles and create each row of stitches. As you knit, the machine will automatically create intricate patterns and designs, depending on the settings you've chosen.


Finishing

Once you've finished knitting your item, you'll need to remove it from the machine and finish it off. This involves closing up any holes or gaps in the stitches, weaving in any loose ends, and blocking the item to ensure that it retains its shape.


Machine knitting on an antique circular sock machine can be a fun and rewarding hobby. With a little bit of practice and patience, you can create beautiful, intricate designs with ease. So why not give it a try and see where your creativity takes you?

ChatGPT Feb 13 Version.


It's pretty simplistic, but it does cover the topic!


Friday, August 26, 2022

Michigan Fiber Festival

 The Michigan GEARS (Gorgeous, Easy, Amazingly Rapid Socks) group, of which I am a member, demonstrated circular sock knitting machines at the Michigan Fiber Festival in Allegan last weekend.   

We had fun, met up with old friends and made some new ones.  

I am currently in process of organizing a workshop on CSM's in Marion, Ohio because someone came by and saw our group.   Class size will be limited, but I will post info when arrangements are completed. 



© Bright Meadow Knits Blog · Privacy Policy · Terms of Use
© Bright Meadow Bicycle Blog · Privacy Policy · Terms of Use